Profil Skipper SVB Philip W.
Mon profil est paramétré comme privé.
Philip W. n'a encore posé aucune question.
Philip W. a déjà répondu à ces questions
1Une question à propos de:
Cartouches de rechange pour préfiltres Diesel
Charlie H. demandé
le 13 avr. 2020
Can it replace an Delphi CAV 296?
Réponses:
Philip W. a répondu
le 14 avr. 2020
The E75K is a physical replacement for the CAV296 type filters. However as a note of caution it is worth checking filter size recommended by the engine manufacture (often rather large such as 30 microns for marine diesels). Many CAV296 type filters are made for the automotive industry and aimed at petrol rather than diesel engines. These may be 5 micron filters or even less. These are likely to cause fuel starvation on a marine diesel. Hengst don’t seem to publish the filter size. That said I have used the E75K on my Yanmar without problems.
Marc S. a répondu
le 13 avr. 2020
Yes, I used both Delphi HDF296 and Hengst E75K on my Yanmar engine. Not the E76K which is longer than the HDF296.
2Une question à propos de:
Boitier de rechange pour mitigeur
Mark B. demandé
le 29 oct. 2019
Hi, do you know if these replacement mixer box and shower boxes (Except for cutting bigger holes) are a direct replacement for the other type with the strapped lid cover its for a cruiser 33??
Mark B. a répondu
le 30 oct. 2019
Hi, Many thanks for your reply and I think that really answers my question however out of curiosity is your own boat a 33 cruiser?? As I take it the mixer tap would therefore be the exact same.
Philip W. a répondu
le 30 oct. 2019
I used this box to replace the “strap cover type”. My particular mixer tap was not directly compatible with the new box. I had to make up some large washers to get it to fit correctly. My mixer tap has a “T” pull and twist handle. This is quite a tight fit within the box so it is difficult to get your fingers under to pull. I have installed a small pull chord to facilitate operation. I guess that there are several models of mixer tap so this might not be the case in your installation.
3Une question à propos de:
Radeau de survie côtier SEAGO / ISO 9650-2
Pete A. demandé
le 28 juin 2019
Does anyone have a rating on the seatec liferaft
Réponse:
Philip W. a répondu
le 29 juin 2019
I have just bought a second one of these after I accidentally inflated and destroyed the one we had. Having seen it inflate rapidly, self-right and then the stabilisation pockets fill quickly to create a stable platform I was well impressed. The overall manufacturing quality and the quality of the enclosed safety items seemed excellent at this price point.
4Une question à propos de:
Boutons Pression TENAX
Nick F. demandé
le 16 mai 2019
Hi. I am looking for the "German Tenax" as fitted by VW /Audi. It is to replace a failed Tenax fastener on a Golf Cabriolet tonneau cover.
Could you kindly confirm the basic measurements of your product including the tolerance for the thickness of the fabric.
Also can you supply them in black however this is not important as I will be replacing both.
Any help and advice would be much appreciated and should you require photographs I can forward these to you
Kind regards
Nick Forster
Réponses:
Philip W. a répondu
le 16 mai 2019
Nick I can not measure one at the moment however I believe that the Tenax sold by SVB are the original standard fastening as used on many cars for 40 years plus (Triumph Spitfire, Lotus Elan, E-Type, etc) I would be surprised if VW did not use the generic item (they might have od course).
Philip W. a répondu
le 19 mai 2019
The base washer diameter is 20mm. The top 19.56mm.
I hope that this helps. Philip
Nick F. a répondu
le 18 mai 2019
Thanks for your reply......if you could possibly provide the measurement across the base washer as that would give me an idea f they will fit, it would be much appreciated. Regards Nick
5Une question à propos de:
Colliers inox
Noel C. demandé
le 5 mai 2019
Is this marine stainless steel - grade 316?
Réponse:
Philip W. a répondu
le 5 mai 2019
The description on the SVB site says W 1.4301 this is 304 (A2) grade. I see this as fine for pipe fittings below deck and away from any bilges that might contain salt water. I would not however use them on deck where salt water spray might be present. Note that if you are looking for 316 clips be aware as some have 316 bands but the worm-screw and holder may not be 316.
6Une question à propos de:
Colliers inox
Deividas T. demandé
le 29 avr. 2019
Stainless Steel Hose Clamps. What Clamping range means? Hose diameter? Which one do I need for 3/4" hose for example?
Réponse:
Philip W. a répondu
le 29 avr. 2019
The clamping range is the minimum and maximum permitted outer diameter of the hose when clamped. This will be somewhat less than the unclamped hose diameter once compression has been allowed for. So for example for a hose with 3/4” outer diameter (19mm) you would need either size 2 (that covers 12-22mm) or size 3 (16-25mm). Note that if 3/4” is the inner diameter you will need to know the wall thickness.
7Une question à propos de:
DYNA ONE - Performances maximales
Denys B. demandé
le 18 févr. 2019
Good day SVB,
Please kindly advise if you can splice and make loops on each side of this dyneema. This will go into a backstay and needs both sides loops. Will you supply to Dubai, UAE??
thanks in advance.
Réponses:
MILOS R. a répondu
le 26 avr. 2021
On top of YouTube SVB has a splicing manual and equipment available.
Philip W. a répondu
le 18 févr. 2019
It is easy to eye-splice or form loops, soft shackles, etc. There are some good videos on Youtube explaining how to make them strong. Amongst other things I have used eye splices on both ends to form a powerful kicker/vang. The only consideration for a backstay would be the choice of blocks or low friction eyes. As dyneema had less stretch/bounce than polyester any continous pumping of the mast might put heat in to the the rope on the turning surfaces. Dyneema doesn’t like heat.
8Une question à propos de:
Lampe LED FLEXISPOT
Emilia M. demandé
le 21 juin 2018
Dear Sir or Madam,
I need a Declaration of Conformity fo this product. Could you send me this document in email: rb@nauticom.pl. This is very important.
Best regards
Robert Boniec
Emilia M. a répondu
le 3 juil. 2018
This case is very very important. You wrote in the website, this product have a certificate CE. I need this document.
Emilia M. a répondu
le 3 juil. 2018
Dera Sir od Madam,
I need now a certificate CE for this products. could you have this document?
W P. a répondu
le 22 juin 2018
Dear Emilia, dear Robert, currently we don't have it as a PDF. We contacted the manufacturer and will add it to this website asap. Be patient a bit longer please. Thanks and have a good day!